Diode laser Body Contouring working principle:
Cryoprecipitation technology uses vacuum negative pressure to suck fat into the slot and then destroys fat cells through freezing. The 1060nm laser body sclupture noninvasive laser defat detector heats the fat cells with the laser at 1060nm, destroys the fat cells, and thus achieves the purpose of reducing the fat cells. The whole treatment was dominated by warm heat and the pain was low.
Diode laser sculpture is a laser-based, non-invasive treatment. That’s used to target and reduce or eliminate fat cells directly. It works for both men and women and on a variety of body types. One procedure takes an average of 25 minutes and can target multiple areas at one time.
Stubborn fat removal:
- Underarm
- Back
- Upper abdomen
- Outer thigh
- Flank
-Inner thigh
- Calf
1. Constant temperature control, real-time temperature detection, skin temperature refrigeration, will not cause skin damage.
2. The treatment process is all close to the skin treatment, there is no danger of direct laser contact with human eyes.
The 3.1060nm laser is applied to the subcutaneous tissue without causing damage to the deep organs of the human body.
4. The operation is simple and portable, and the treatment only needs to fix the treatment head on the patient's body and then open the switch.
5. Multiple hand tools can work at the same time, easily expanding the treatment area and improving the treatment efficiency.
Apolomed body contouring laser system is USA FDA cleared.
This non-invasive body contouring laser system is used to eliminate fat cells. It is a reliable and robust system equipped with four individually controlled 4 applicators, allowing simultaneous treatment in more than one body area.
FRIENDLY APPLICATOR DESIGN
The 1060nm wavelength lasers with applicator size 40x80mm or 40x60nn sapphire heads, each applicator head is equipped with 2 temperature sensors and 4 contact sensors to allow machine to monitor and control output to ensure patient safety and comfort.
Delivering contact cooling to ensure patient is always comfortable.
Individual control of each head enables disparate areas to be treated simultaneously.
Handpiece can be extended by pulling the extension cradle for best treatment position.
Our ARM- A9 (Android/OS) software offers for two types of use, smart mode which greatly simplifies operation and reduces the chance of errors, or professional mode for a more tailored treatment.
270°Flodable & Turn nover 9.7'' Android touch screen
RF IC card control for different business models
FlexiPrice which reduces the initial cost in exchange for a pay/use element
Alternatively can also be used to enable machine sharing between different operators
Our diode laser body sculpture is latest fat reduction technology Non-invasive, no down-time 25 minutes quick & hands-free treatment. Key benifit of our machine:
4 applicator heads for treatment in a range of body areas
Individual control of each applicator head
Smart mode for guided use of the system
Temperature and Contact sensors to ensure safe use
High value treatment
Purchase option with low cycle costs
Proven technology
Laser sculpture model# | HS-851 |
Slimming applicator | 4pcs |
Applicator size | 4*8cm,4*6cm |
Pulse mode | CW Pulse mode |
Output Power | 60W per diode (Total 200W) |
Power density | 0.8~1.6 W/cm2 |
Operate Interface | 9.7" True color touch screen |
Cooling system | Air&Water compressor cooling system |
Power supply | AC120~240V, 50/60HZ |
Dimension | 64*52*110CM |
Weight | 60Kgs |
content is empty!
Shanghai Apolo Medical Technology Co., Ltd is a leading designer and manufacturer of Intense Pulsed Light (IPL), Various technologies Laser (Pico Nd:YAG,CO2......), Platform Laser, HIFU, PDT LED, Body Slimming technologies for using in medical and aesthetic industries.